Ingredients: Natural shellac does not contain harmful substances

Note: Please be careful when using it. It is best to check the information first, test it on other parts, etc. We are not responsible for any damage to the pen.

Eur-lex.europa.eu eur-lex.europa.eu

1. Ink cartridge installation: Submariner, TD, PFM, Duofu, etc. All kinds of old fountain pens that use ink cartridges can be glued with this method.
2. Ink leakage repair: If there is ink leakage due to aging of glue in the pen grip and other places, you can reseal and glue it.
3. Cracks: If there are problems such as cracks on the pen barrel, you can use this to glue it
4. Other bonding: For example, camera leather can be bonded in this way

How to use:

1. Use a toothpick to pick up a small amount of shellac and apply it evenly to the areas where it is needed, such as the threads inside the pen holder or other sealing areas.
2. After waiting for 30 minutes, you can test it (the pen should be able to be used normally). After 12 hours, it should be completely dry and should be firm, not shaking or loose.
3. After use, please be careful not to get shellac on the bottle cap and keep it tightly screwed (you can lock it with a small piece of plastic wrap to prevent the shellac from sticking to the bottle cap).
4. Shellac will remelt due to high temperature (about 60 degrees Celsius). Therefore, if you need to undo the adhesive, use 60 degrees hot water to scald the area for about 1 minute to undo it (if it is a screw thread, you need to unscrew it yourself).
5. One bottle can hold about 20 ink sacs.

Notice

• Please read our store's precautions before placing a purchase.
• Because shooting and various types of monitors mustThere is color difference, the picture is for reference only, please refer to the actual product received for the color. Returns and exchanges due to color difference will not be accepted as a defect.
• The flow of goods is large. If there is a shortage of goods, our store reserves the right to accept or reject orders.